Auto Capture

SmartSnare Auto Cap System

Script-only trap: fits any seat furniture, auto-captures sitters

A drop-in auto-capture system that turns any furniture with a sit target into a smart trap: it scans for nearby avatars, force-sits the ones that qualify, and locks them down with configurable RLV restrictions until the timer lets them go. Script only; bring your own furniture.

Jump to manual

Compatible BodiesAny avatar

Version1.0.4

Buy

Buy on Marketplace

Key Features

Capture Modes: Whitelist catches only the avatars you chose: perfect for private sessions. Blacklist catches everyone except the names you protect, so dominants stay free. All is open season for public traps and dungeons. Each list holds up to 10 avatars.
Manual Capture: Not feeling patient? Hit Capture, scan the room on demand, and pick exactly who gets dragged onto the seat: works no matter what mode you're in or whether auto-scan is even on.
RLV Restrictions: Eleven categories: sitting, touch, edit, teleport, chat, IM, inventory, names, location, fartouch, and camera down to mouselook. Toggle each one live, even mid-capture, or apply and clear every rule with a single button over the standard relay protocol, OpenCollar compatible.
Timer & Auto-Release: Hold them from one minute to two hours. A floating countdown hovers over the furniture for everyone to see; extend, pause, resume, or stop the clock anytime, and a warning before release gives the captive a heads-up.
Drop-In Compatibility: Works with any furniture that already has a sit target, no rebuilding required. Plays nicely with AVsitter builds and existing poses. Owner, trusted operators, or fully public: you decide who holds the controls.
Make It Yours: Full bilingual interface, English and 中文, switchable anytime from the menu. Every setting lives in the SmartSnare config notecard (scan range, timers, restrictions, access), all editable without touching a script. Optional broadcast notifications keep the room in the loop.

Changelogv1.0.45 updates — tap to expand

1.0.4 · August 2026

Fixed menu button label overflow for long avatar names

1.0.3 · October 2025

Added RLV rule reapplication for already-captured avatars

1.0.0 · October 2025

Rebranded to SmartSnare

0.0.2

Switched to category-based RLV restrictions

0.0.1

Initial release

Manual

How it works

Getting Started

Put it on the furniture: right-click the furniture → Attach, or rez it in-world with Modify/Copy permissions.
Open the menu by touching the object (if touch is enabled), or by saying the menu command (default cap) on the configured chat channel.
All settings load from the poi_Capture.Config notecard inside: edit it, then use Settings → Reload Cfg to apply changes. No scripting, no reset.

Works with any furniture that already has a sit target, including AVsitter builds; no rebuilding required.

Main Menu

The main menu shows Auto Capture status (▣ ACTIVE / ☐ INACTIVE), the current Mode (WHITELIST / BLACKLIST / ALL), and Captured (whoever is in the seat, or "None"), plus these buttons:

Button	Action
`▣/☐ Auto Capture`	Toggle continuous scanning on/off
`> Capture <`	Scan immediately and pick someone to force-sit (see Manual Capture)
`⏱`	Open the Timer menu
`RLV`	Open the RLV restrictions menu
`Release`	Release whoever is currently captured
`Targets`	Manage the whitelist/blacklist and capture mode
`Settings`	Scan radius/interval info, notifications, config reload
`[中文]` / `[EN]`	Switch language (the button shows the language you'll switch TO)

Trap & Auto-Capture

Auto Capture

Turn on Auto Capture and it scans continuously, force-sitting the first qualifying avatar in range. Who qualifies depends on the capture mode:

Mode	Behavior
`Whitelist`	Only avatars in your whitelist get captured; everyone else is ignored
`Blacklist`	Anyone gets captured except avatars on your blacklist (protects operators/dominants)
`All`	Anyone in range gets captured, no list needed

Cycle modes with the Mode button in the Targets menu. Each list holds up to 10 avatars.

Manual Capture

The > Capture < button scans a 30m radius immediately and lists nearby avatars. Pick one to force-sit them right away: this works regardless of the current capture mode or whether auto-scanning is on.

Targets

Targets menu (Targets):

Button	Action
`View List`	List every whitelist/blacklist entry by name in local chat
`Add Target`	Scan nearby avatars (30m) and pick one to add to the active list
`Remove`	Remove the most recently added entry from the active list
`Clear All`	Empty the active list
`Mode: WHITELIST/BLACKLIST/ALL`	Cycle the capture mode

Adding/removing targets is disabled in All mode, since no list is used.

Access Control

Set in the poi_Capture.Config notecard: three levels:

Only Owner: only the furniture owner can open the menu
Owner + Operators: the owner plus up to 10 operator UUIDs you list
Public: anyone can open and use the menu

Whatever the mode, a captured avatar can always control their own RLV and Timer sub-menus.

RLV Restrictions

After capture, SmartSnare can apply up to eleven categories of RLV restriction over the standard relay protocol (OpenCollar compatible):

Category	Effect
Sitting	Locks the avatar to the seat
Fartouch	Blocks touching distant objects
Edit	Blocks editing objects
Teleport	Blocks all teleporting
Touch	Blocks touching anything
Inventory	Hides the inventory window
Names	Hides avatar names/tags
Chat	Blocks sending/receiving chat
IM	Blocks instant messages
Location	Hides map and location info
Camera	Restricts camera distance, down to forcing mouselook

Each restriction is a live toggle in the RLV menu (❌ = currently applied, ✅ = currently free). Use Apply Now to push every enabled restriction at once, or Clear All to remove everything without releasing the captive. Which restrictions auto-apply on capture is set per-category in the config notecard; menu toggles only change the live state of the current captive.

Requires a Restrained Love (RLV) viewer or relay to take effect.

Timer

Set auto-start in the config notecard so a timer starts on every script-initiated capture, or leave it off and use ▶ Start manually.
Duration: 1 minute to 2 hours.
Extend +1m / Extend +5m: add time to a running timer.
⏸ Pause / ▶ Resume: freeze and resume the countdown.
⏹ Stop: cancel the timer without releasing the captive.
A warning message is sent to the captive before release (lead time set in the notecard).
▣/☐ Display: toggle a floating-text countdown above the furniture (yellow while running, orange while paused).

The timer always releases the captive when it reaches zero; this cannot be disabled. It also never auto-starts for a voluntary sit, only for a script-initiated capture.

Escape & Release

Release on the main menu clears all RLV restrictions and stands the captive up.
After any release (manual or timer), the avatar enters a 60-second cooldown during which they can't be re-captured, giving them time to walk away.

Settings

Settings menu (Settings):

Button	Action
`▣/☐ Notify`	Toggle broadcast notifications: capture/release/RLV events said to local chat instead of just the owner
`Reload Cfg`	Re-read the `poi_Capture.Config` notecard without resetting anything

Scan radius and interval are displayed here but changed in the poi_Capture.Config notecard (radius up to 96m, interval 1–30s): edit the card and hit Reload Cfg to apply. Everything else (capture mode, lists, RLV auto-apply, access, menu command and channel, touch enabled, timer defaults) is configured in the same notecard.